 |
CPU306
●K306-24DT |
| Model | CPU306 | |||
| K306-24DT | K306-24AT | K306-24DR | K306-24AR | |
| مشخصات فنی |
||||
| CPU | 16-Bit Industrial | |||
| Execution Speed | Typical Bool Instruction Time: <0.5μS | |||
| Word Operation Time: <48μS | ||||
| Arithmetic Operation Time for Integers: <65μS | ||||
| Arithmetic Operation Time for Floating Points: <150μS | ||||
| DI Points | 14XDC24V | |||
| DO Points | 10XDC24V | 10XRelay | ||
| User Program Memory | FRAM, 8KB/About 1,200 Steps | |||
| Program Backup | Permanent Storage, Without the Need of Battery | |||
| Memory Area | Variable Storage Area (V Area): 4KB | |||
| System Storage Area (SM Area): 300 Bytes | ||||
| Internal Storage Area (M Area): 32 Bytes | ||||
| Data Retention Characteristic | Configure with the Programming Software: V Area, C (Counter) Area | |||
| Retention Mode and Period | Adopt Super Capacitors and Support a Retention Period of not Less than 144 Hours Upon Power Failure Under Normal Temperature. | |||
| Data Backup Characteristic | Perform Backup Operations VB3648~VB3902 According to User Instructions, 255 Bytes in Total | |||
| Backup Mode and Time | FRAM, 255 Bytes in Total (Writing Operation for 10 Billion Times), Permanent Backup | |||
| Floating Points | Supported; the Whole V Area can be Used for Floating Points | |||
| Programming Language Supported | Ladder Drawing (LD), Instruction List (IL) | |||
| Instruction Set | Basic Instructions: 55; Expansion Instructions: 252 | |||
| Password Protection | Yes | |||
| Max. I/O | Digital Data: 88 in Total (64 DI and 64 DO Respectively); | |||
| Analog Data: 16 in Total (16 AI and 16 AO Respectively) | ||||
| Counter | 128 | |||
| Operation Mode of Counter | Addition, Subtraction | |||
| Counter Range | -32768~32767 | |||
| Counting Value Retention Function | Yes | |||
| Timer | 128 | |||
| 1 ms Time Base: 4 | ||||
|
10 ms Time Base: 16 |
||||
| 100 ms Time Base: 108 | ||||
| High-speed Counter | 6 High-Speed Counters | |||
| Where, Single-Phase Counters: 6, With a Maximum Frequency of 30 KHz | ||||
| Where, Dual-Phase Counters: 4, With a Maximum Frequency of 20 KHz | ||||
| Pulse Output | 2, PTO (Pulse Train Output)/PWM (Pulse Width Modulation Output); | |||
| Maximum Output Frequency: 20 KHz(Note: the relay output CPU does not have high speed pluse function) | ||||
| Analog Potentiometer | 2, 10-Bit Resolution, Values Corresponding to Internal Registers | |||
| Interruption Function | Timing Interruption: 2, 1ms Resolution; | |||
| Timer Interruption: T2/T3, 1ms Resolution; | ||||
| Edge Interruption: 4, Rising Edge or Falling Edge Optional; | ||||
| High-Speed Interruption, Communication Interruption | ||||
| Real-time Clock | Yes, With an Error not Greater than 2 Minutes/Month Under a Temperature of 25°C | |||
| The user can use the software to set/read: year, month, day, hour, minute, second, week. Standby batteries are used to supply power for the real-time clock upon power failure. Under normal temperature, the accumulative retention period of the real-time clock upon power failure is up to 50,000 hours. | ||||
| Number of Connectable Expansion Modules | 4; regardless of types | |||
| COM Port | 1, RS232 or RS485; | |||
| Supported working modes: Programming, Modbus-RTU (slave), Free protocol | ||||
| Equipment Connected with COM Port | RS232/RS485: PC (For Programming), Third-Party HMI Panel, Third-Party Serial Communication Equipment (For Example, Instruments, Bar Code Reader, etc.) | |||
| Input Power Supply | DC24V±20% | AC85~265V | DC24V+/-20% | AC85~265V |
| Sensor Load Power Supply | DC24V, Max. 500 mA | |||
| Dimensions (L*W*H) | 125X114X70mm | |||
| دیاگرام سیم بندی |
||||
 |
||||
| نام فایل | نوع فایل | فرمت | تاریخ | دریافت فایل |
| Kinco Products Catalog | Product catalog | zip | 2012-08-03 |  |
| CE Certificate- PLC、servo 、stepper | Certification and others | rar | 2012-07-12 | |
| Kinco PLC Hardware User Manual | User manual | zip | 2012-05-16 | |
| Kinco K3 Software Manual1104 | User manual | zip | 2011-05-19 | |
| Kinco K3 PLC Catalogue | Product catalog | rar | 2011-05-19 | |
| KincoBuilder_V1.1.8.0En_setup_110713.zip | Software | zip | 2011-05-19 | |